Teleview TAV900A - 4 How to Upgrade Firmware; Firmware Upgrade from Teleview Web Site(TELEVIEW URL); Firmware Upgrade with FTP(TLVFTPD)

TLV-300E/TAV-900A Professional Digital TV Receiver User’s Manual
4. HOW TO UPGRADE FIRMWARE
4.1 FIRMWARE UPGRADE FROM TELEVIEW WEB SITE(TELEVIEW URL)
You could find newer version of firmware at TELEVIEW web site. Therefore, if you have Internet
connection, you could upgrade the firmware from TELEVIEW web site.
Connect an Ethernet cable to the receiver.
Connect the Ethernet cable to internet.
If the local network has active DHCP server, the receiver will set IP ADDRESS, NET MASK and
GATEWAY IP ADDRESS automatically. Please make CONFIG/SYSTEM/NETWORK/DHCP menu ON.
However if the local does not have a DHCP Server, enter the IP Address and Gateway address on
CONFIG/SYSTEM/NETWORK/IP ADDRESS, CONFIG/SYSTEM/NETWORK/NET MASK and
CONFIG/SYSTEM/NETWORK/GATEWAY menu.
Select SAVE on CONFIG/SYSTEM/FIRMWARE UPGRADE/TELEVIEW URL MENU.
The receiver will automatically download firmware from TELEVIEW web site(http://www.teleview.com).
When the upgrade is finished, the receiver will ask to reboot it.
The file http://www.teleview.co.kr/download/fw/th3402_v2/th3402_v2_tlv300f_fw, is always recent
firmware of the receiver.
Never turn off the receiver during the flash ROM writing. It will destroy the firmware of
the receiver and the user cannot recover the firmware again. If this situation happens, it will be
necessary to return the receiver to the vendor to repair the flash ROM.
4.2 FIRMWARE UPGRADE WITH FTP(TLVFTPD)
Follow this instruction when you could not connect to Public Network.
Connect an Ethernet cable to the receiver.
Connect the Ethernet cable to local network.
If the local network has active DHCP server, the receiver will set IP ADDRESS, NET MASK and
GATEWAY IP ADDRESS automatically. Please make CONFIG/SYSTEM/NETWORK/DHCP menu ON.
However if the local does not have a DHCP Server, enter the IP Address and Gateway address on
CONFIG/SYSTEM/NETWORK/IP ADDRESS, CONFIG/SYSTEM/NETWORK/NET MASK and
CONFIG/SYSTEM/NETWORK/GATEWAY menu.
Open Command prompt window on the PC connected in common local network, and type “tlvftpd
FW_FILENAME” (tlvftpd is a program that download firmware to receiver available from Teleview on
request).
Select SAVE on CONFIG/SYSTEM/FIRMWARE UPGRADE/TLVFTPD MENU of the receiver.
Version 2.0 54