Teleview TAV900A - CONFIG;SUB Sub-Menu

TLV-300E/TAV-900A Professional Digital TV Receiver User’s Manual
3.2.2.7 CONFIG/MAIN/OSD sub-menu
Enable or disable OSD for main display. CONFIG/FAULT/MAIN/OSD, CONFIG/FAULT/SUB/OSD,
STATUS/MAIN/PSIP and STATU/SUB/PSIP, CONFIG/MAIN/AUDIO/VOLUME METER,
CONFIG/SUB /AUDIO/VOLUME METER, DIAGNOSIS/COLOR BAR(main video) will use OSD. To
disable all OSD on main video, disable this menu.
3.2.3 CONFIG/SUB sub-menu
Table 16 CONFIG/SUB submenu architecture
CONFIG
SUB Configure SUB channel audio/video decoder.
SUB/SOURCE Choose input of SUB channel audio/video decoder. Input can
be AUTO SELECTION, RF-IN1, RF-IN2, BNC-1, BNC-2,
BNC-3, BNC-4 or BNC-5. AUTO SELECTION mode selects
valid input automatically. When two or more input is valid, the
setting PRIORITY is used to choose one out of them.
SUB/VIDEO Configure FRAME RATE, ASPECT RATIO and SCREEN
MODE.
SUB/AUDIO Configure DIGITAL AUDIO, PROLOGIC, LANGUAGE,
VOLUME, MUTE, VOLUME METER.
SUB/CAPTION/ACTIVE Choose caption mode,ACTIVE, EIA-608 and EIA-708
SUB/CAPTION/ACTIVE/EIA-
608A
Select Caption Service for Analog TV Caption (EIA608).
CC1~CC4 or TXT1 ~ TXT4.
SUB/CAPTION/ACTIVE/EIA-
708B
Select Caption Service for DTV caption (EIA708). Service 1 ~
Service 7.
SUB/OSD Enable or disable OSD on composite display (PSIP display,
FAULT status display and Volume bar, Constellation)
The SUB sub-menu is used to configure SUB Video setting. There are SOURCE, VIDEO, AUDIO,
CAPTION and OSD sub-menus in the SUB sub-menus. The menu functions are equivalent with
MAIN sub-menu.
Version 2.0 35