Teleview TAV900A - CONFIG;MAIN Sub-Menu

TLV-300E/TAV-900A Professional Digital TV Receiver User’s Manual
FAULT OUT Program fault condition. Entries consist of MAIN, SUB, INPUT
PORT and THRESHOLD INTERVAL.
PRIORITY Choose automatic source selection priority. Entries consist of
1
st
~ 7
th
.
AUTO SELECTION DELAY Choose automatic source selection latency on signal loss for
SOURCE AUTO SELECTION mode. Entries consist of 1 sec,
2 sec,3 sec, 4 sec, 5 sec and 10 sec.
SI MODE Choose SI mode. Entries consist of ATSC, DVB
3.2.2 CONFIG/MAIN sub-menu
The MAIN sub-menu allows you to configure MAIN video setting. There are SOURCE, VIDEO,
AUDIO, CAPTION and OSD sub-menus in the MAIN sub-menu.
<
US RO
00 I NG /C N F ME
E > DIVC
AI/
< E
>T VU L 3M E N : O
AA U IO O P I N OOT S DD C
Table 12 CONFIG/MAIN submenu architecture
CONFIG
MAIN Configure MAIN channel audio/video decoder.
MAIN/SOURCE Choose input of MAIN channel audio/video decoder. Input
can be AUTO SELECTION, RF-IN1, RF-IN2, BNC-1, BNC-2,
BNC-3, BNC-4 or BNC-5. AUTO SELECTION mode selects
valid input automatically. When two or more input is valid, the
setting PRIORITY is used to choose one out of them.
MAIN/VIDEO Configure DISPLAY MODE, DISPLAY TYPE, FRAME RATE,
ASPECT RATIO and SCREEN MODE.
MAIN/AUDIO Configure DIGITAL AUDIO, PROLOGIC, LANGUAGE,
VOLUME, MUTE, VOLUME METER and SDI AUDIO.
MAIN/CAPTION Choose caption mode, ACTIVE, EIA-608A, and EIA-708B
MAIN/CAPTION/ACTIVE/EIA-
608A
Select Caption Service for Analog TV Caption (EIA608).
CC1~CC4 or TXT1 ~ TXT4.
Version 2.0 30