Teleview TAV900A - Config;Auto Selection Delay; Config;Si Mode; STATUS Menu

TLV-300E/TAV-900A Professional Digital TV Receiver User’s Manual
PRIORTY/1
st
~ 7
th
Select auto selection priority for SOURCE AUTO SELECTION
mode.
3.2.11 CONFIG/AUTO SELECTION DELAY:
This is the delay time to auto select if the input that you have been selected turns to unlock. This menu works
only when you choose AUTO SELECTION. You could set up to 1, 2, 3, 4, 5, or 10 sec.
Example) if you select 3 SEC, the receiver will wait 3 second to get source and after 3 second the receiver
moves to next priority source.
Table 24 CONFIG/AUTO SELECTION DELAY submenu architecture
CONFIG
AUTO SELECTION
DELAY
Choose automatic source selection latency on signal loss for
SOURCE AUTO SELECTION mode. 1 sec, 2 sec, 3 sec, 4 sec,
5 sec or 10 sec.
3.2.12 CONFIG/SI MODE
User can select SI MODE. It’s from DVB, ATSC.
This menu only affects on the interpretation of SI table. This menu select the receiver as
DVB receiver or ATSC receiver.
It does not convert one type of SI table to another.
3.3 STATUS MENU
<
IM NA
00 SS A TE
US B>
U/
< R
>T VU L 3M E N : T
2N 1 RIF F - N U TPI- I . . .N
Table 25 STATUS menu architecture
STATUS menu structure
MAIN For the information about the main video. Entries are VIDEO,
AUDIO, PSIP, and CAPTION
SUB For the information about the sub video. Entries are VIDEO,
AUDIO, PSIP, and CAPTION
Version 2.0 42