Teleview TAV900A - Page 3

TLV-300E/TAV-900A Professional Digital TV Receiver User’s Manual
2.11 Using FAULT Output 26
2.12 SNMP Network Management 26
2.13 Saving Configuration 26
2.14 Menu Using OSD 26
3. MENU DICTIONARY 28
3.1 Overview 28
3.2 CONFIG Menu 29
3.2.1 CONFIG Menu Overview 29
3.2.2 CONFIG/MAIN sub-menu 30
3.2.3 CONFIG/SUB sub-menu 35
3.2.4 CONFIG/RF-IN1 sub-menu 36
3.2.5 CONFIG/RF-IN2 sub-menu 36
3.2.6 CONFIG/BNC OUT(AES/ASI/SMPTE310M) sub-menu 37
3.2.7 CONFIG/SYSTEM sub-menu 38
3.2.8 CONFIG/NETWORK 39
3.2.9 CONFIG/FAULT OUT sub-menu 40
3.2.10 CONFIG/PRIORITY 41
3.2.11 CONFIG/AUTO SELECTION DELAY: 42
3.2.12 CONFIG/SI MODE 42
3.3 STATUS Menu 42
3.3.1 STATUS/MAIN sub-menu 43
3.3.2 STATUS/SUB sub-menu 46
3.3.3 STATUS/RF-IN1 and STATUS/RF-IN2 sub-menu 47
3.3.4 STATUS/INPUT sub-menu 47
3.3.5 STATUS/VERSION sub-menu 48
3.3.6 STATUS/SERIAL NUMBER sub-menu 48
3.3.7 STATUS/MAC-ADDRESS sub-menu 48
3.3.8 STATUS/LICENSE LEVEL sub-menu 48
3.4 SAVE PROFILE Menu 49
3.5 RECALL PROFILE Menu 49
3.6 AUTO SEARCH Menu 49
3.7 DEFAULT Menu 49
3.8 DIAGNOSIS Menu 52
4. HOW TO UPGRADE FIRMWARE 54
Version 2.0 3