Configure basic wireless parameters
To configure basic wireless parameters:
1. Log in to the device’s web UI.
2. Go to Wireless > Basic.
3. Set up basic wireless parameters.
1) SSID: Modify the device’s SSID.
2) Security Mode, Encryption Type, Key: We recommend that you select WPA2-PSK and AES and set up a
WiFi password (Key). For more information, please refer to Encryption Method Description.
3) Channel: Click the dropdown list and select a wireless channel. To avoid channel conflict, please select a
channel that is less used in surrounding area. You can go to Advanced > Diagnose and select Site Survey
to check each channel’s usage.
4) Other parameters: If not specified, you can keep the default value.
4. Click Save to make these settings take effect.
To Next Page
Loading...
