Terex Genie GS-1330m User Manual

Service and Repair Manual August 2021
Scissor Components
164 GS
™
-30m • 32m • 30 • 32 • 46 • 55 Part No. 1309020GT
3 Pull out the red Emergency Stop button at the
ground controls.
Result: The ground control LCD display will
show the following.
4 Press the scroll down button.
Result: The ground control LCD display will
show the following.
5 Press the enter button.
Result: The ground control LCD display will
show the following.
6 Press the enter button.
Result: The ground control LCD display will
show the following.
7 Press and hold the scroll down button for
5 seconds.
Result: The ground control LCD display will
show the following.
8 Press the enter button.
Result: The ground control LCD display will
show the following.
9 Press the buttons in the following sequence:
(down)(down)(up)(enter).
Note: After each key press an asterisk (*) will
appear on the second line of the LCD display.
Result: The ground control LCD display will
show the following.
Note: After 3 seconds the LCD display will return
to SELECT OPTION PLAT. OVERLOAD.
10 Push in the red Emergency stop button.

Terex Genie GS-1330m Specifications

General

Brand	Terex
Model	Genie GS-1330m
Category	Lifting Systems
Language	English