TESTO 400 - Page 109

13 testo DataControl PC software
109
The following measuring site information can be saved and/or changed:
Measuring site name
System number
System type
Manufacturer
Year of construction
System serial number
Annotation
The following characteristics can be assigned to the respective measuring site:
None
Duct
Outlet
k-factor
Only the field Measuring site name is mandatory. Other fields may
remain blank.
2
Click on Save.
If duct, outlet or k-factor was selected as a measuring site feature, the
specific information for the measuring sites must be inserted.
In addition, for the Channel feature there is the option to configure
HVAC grid measurement.