Texas Instruments TI-Nspire - Preventing name conflicts

42 TI-Nspire™ Reference Guide
getLockInfo()
Catalog
>
getLockInfo(Va r) ⇒ value
Returns the current locked/unlocked state of variable Va r.
value =0: Va r is unlocked or does not exist.
value =1: Va r is locked and cannot be modified or deleted.
See Lock, page 57, and unLock, page 109.
getMode()
Catalog
>
getMode(ModeNameInteger) ⇒ value
getMode(0) ⇒ list
getMode(ModeNameInteger) returns a value representing the
current setting of the ModeNameInteger mode.
getMode(0) returns a list containing number pairs. Each pair
consists of a mode integer and a setting integer.
For a listing of the modes and their settings, refer to the table below.
If you save the settings with getMode(0) & var, you can use
setMode(var) in a function or program to temporarily restore the
settings within the execution of the function or program only. See
setMode(), page 90.
Mode
Name
Mode
Integer Setting Integers
Display Digits
1
1
=Float, 2=Float1, 3=Float2, 4=Float3, 5=Float4, 6=Float5, 7=Float6, 8=Float7,
9=Float8, 10=Float9, 11=Float10, 12=Float11, 13=Float12, 14=Fix0, 15=Fix1,
16=Fix2, 17=Fix3, 18=Fix4, 19=Fix5, 20=Fix6, 21=Fix7, 22=Fix8, 23=Fix9,
24=Fix10, 25=Fix11, 26=Fix12
Angle
2
1
=Radian, 2=Degree, 3=Gradian
Exponential Format
3
1
=Normal, 2=Scientific, 3=Engineering
Real or Complex
4
1
=Real, 2=Rectangular, 3=Polar
Auto or Approx.
5
1
=Auto, 2=Approximate
Vector Format
6
1
=Rectangular, 2=Cylindrical, 3=Spherical
Base
7
1
=Decimal, 2=Hex, 3=Binary