Configuration and Calibration
3-2
Within the calibration and configuration menu, the display shows your position.
Use the key arrows to move through the menus. Use the left and right arroy keys
(
) to move within the same level, and press the Enter and Exit keys to change the level. If
you want to modify a selected parameter, press the Enter key and introduce the new value with
the up and down arrow keys (
) or choose and option ( ), as appropriate. Press Enter
to accept. Press Exit if you want to exit the menu.
We recommend printing the calibration parameters after configuring the system using
the P_cal function from the options submenu.
To Next Page
Loading...