Thames Side Smart Series - DIV (D1); DIV1 (D11); DIV2 (Di2); DP (Dp)

Configuration and Calibration
3-4
3.2.1 Operation (funct)
It selects the operation mode of the equipment.
These are the options:
Indica: Operation in the indicator mode
Repeat: Operation in the remote display mode (see 2.10)
3.2.2 Range (birange)
Activates the Multiple Ranges function. In ON position, the menu allows the access
to MAX1, DIV1, DP1, MAX2, DIV2 and DP2 parameters, and MAX, DIV and DP2 disappear
from the menu (see 3.2.1).
3.2.3 MAX (cap)
Maximum capacity of the scale.
3.2.4 DIV (d1)
Value of the scale division.
3.2.5 DP (dp)
Position of the decimal point. By pressing the arrow keys you can move the decimal
point to the desired position so that the division of the scale would be in the same unit than the
capacity of the scale.
3.2.6 MAX1 (cap1)
The capacity for Range 1.
3.2.7 DIV1 (d11)
The Division for Range 1.
3.2.8 DP1 (dp1)
Position of the decimal point for Range 1. By pressing the arrow keys you can move
the decimal point to the desired position so that the division for the Range 1 would be in the
same unit than the capacity.
3.2.9 MAX2 (cap2)
The capacity for Range 2 (=total capacity)
3.2.10 DIV2 (di2)
The Division for Range 2. By pressing the arrow keys you can move the decimal
point to the desired position so that the division for the Range 2 would be in the same unit than
the capacity.
3.2.11 DP2 (dp2)
Position of the decimal point for Range 2.