Thames Side Smart Series - AUTO ZERO (0-Start); NEG-ZERO(0-Neg); UNITS (Unit); ZERO RANGE (0-Top)

Configuration and Calibration
3-5
3.2.12 ZERO TRACK (0-trac)
The level at which the system is automatically zeroed as long as the weight is within
the selected band.
These are the options:
OFF: Deactivated function
0,5dd: ± 0.5 divisions
1dd: ± 1 division
2dd: ± 2 divisions
3.2.13 ZERO RANGE (0-top)
The range within which the scale may be zeroed (
key and zero track).
These are the options:
1.9%: Selecting 1.9% means ±1.9% around the calibrated zero point.
100%: Selecting 100% means ±100% around the calibrated zero point.
3.2.14 AUTO ZERO (0-start)
The indicator zeroes when it is turned on.
These are the options:
ON: Activated function
OFF: Deactivated function
3.2.15 NEG-ZERO(0-neg)
The indicator goes to zero automatically when the weight value is negative and
remains stable for more than 5 seconds.
These are the options:
OFF: Deactivated function
ON: Activated function
3.2.16 UNITS (unit)
Weight unit of the scale.
These are the options:
kg: kilogram
t: ton
g: gram
lb: pound
o: ounce
none: none