Thames Side Smart Series - ERROR (Error); FULL (Aout_F); MIN (Aout_0); OFFSET (Offset)

Configuration and Calibration
3-15
3.6.1 TYPE(type)
Weight value of analog output signal.
These are the options:
GROSS: Gross weight value is taken as reference
NET: Net weight value is taken as reference
3.6.2 OFFSET (offset)
Analog output zero offset.
These are the options:
0% y 20%.
3.6.3 ERROR (error)
Output in case of system error.
These are the options:
FULL: Output = MAX
HOLD: Hold the output to the current value
ZERO: Output = MIN
3.6.4 MIN (aout_0)
Minimum capacity of the analog output range.
3.6.5 FULL (aout_f)
Maximum capacity of the analog output range.
3.6.6 TW MIN (aout_f0)
Fine adjustment of the minimum analog output. Modify the level pressing the arrow
keys.
3.6.7 TW FULL (aout_ff)
Fine adjustment of the maximum analog output. Modify the level pressing the arrow
keys.
Figure 3.6.7.1 Typical Analog Output Scaling