Configuration and Calibration
3-7
3.3.1 FILTER (filter)
Filter level. You can choose among different levels or deactivate this function. The
higher the selected value is, the higher the filter level is
These are the options:
OFF, 2, 4, 8, 16, 32, 64
3.3.2 MOT BAND (band)
The level at which motion is detected. Out of this level there is no stability.
These are the options:
OFF: Deactivate function
1dd: One division
2dd: Two divisions
3dd: Three divisions
3.3.3 TARE LOCK (tareloc)
Allows activating and deactivating the tare lock.
Its possible options are:
On, off
If that option is on the tare is locked. That is the equipment default option and under
which the tare is activated until it is manually deactivated (see 2.5.2). Whe that option is off
the tare acts as follows: if after removing the weight its value is within the range of ¼ divisions
around zero then the equipment automatically deactivates the tare.
3.3.4 LANGUAGE(lang )
You can choose among different languages for the printed ticket.
The possible options are:
SPA: Spanish
POR: Portuguese
FRE: French
ENG: English
GER: German
CAT: Catalan
3.3.5 KEY LOCK (loc)
Locks the keyboard. The parameter treatment is performed with a 6 digit binary
number. The value 1 locks the function and the value 0 releases it.
These are the options:
KEYB - LOCK Keyboard lock
PRINT - LOCK PRINT key lock
TARE - LOCK TARE key lock
ZERO - LOCK ZERO key lock
PCS - LOCK PIECES key lock
TOTAL - LOCK TOTAL key lock
5 | 4 | 3 | 2 | 1 | 0
To Next Page
Loading...