THERA-Trainer BEMO - Receiving and Transmitting RF Energy; User Information Acc. to FCC15.21

User manual THERA-Trainer bemo EN
26
Article no. A007-661_Rev 2.0 - Last edited: 2020-06-02
Table 9 - Test specifications for the interference immunity of casings to high-frequency wireless
communication equipment:
Test
frequency
[MHz]
Frequency
band [MHz]
Radio service
Modulation
Maximum
Output
[Watt]
Distance
[m]
Interference
immunity
test levels
[V/m]
385
380 to 390
TETRA 400
Pulse modulation
18 Hz
1.8
0.3
27
450
430 to 470
GMRS 460,
FRS 460
FM
± 5 kHz stroke
1 kHz sine
2
0.3
28
710/745/780
704 to 787
LTE band
13, 17
Pulse modulation
217 Hz
0.2
0.3
28
810/870/930
800 to 960
GDM 800/900
TETRA 800
iDEN 8520
CDMA 850
LTE band 5
Pulse modulation
18 Hz
2
0.3
28
1720/1845/
1970
1700 to
1990
GSM 1800
CDMA 1900
GSM 1900
DECT
LTE BAND
1, 3, 4, 25
UMTS
Pulse modulation
217 Hz
2
0.3
28
2450
2400 to
2570
Bluetooth
WIFI
802.11
b/g/n
RFID 2450
LTE band 7
Pulse modulation
217 Hz
2
0.3
28
5240/5500/
5785
5100 to
5800
WIFI
802.11 a/n
Pulse modulation
217 Hz
0.2
0.3
9
WARNING!
Minimum distances to be observed from high-frequency wireless communication devices.
 The distance specified in Table 9 for high-frequency wireless communication devices must be observed.
 The place of use of the trainer must be located at least 1.5 km away from AM, FM or TV transmission
antennas (transmission masts).
14.4. Receiving and transmitting RF energy
Sender information/receiver information:
‒ Frequency band (ISM band): 2.400 GHz – 2.4835 GHz
‒ Usable frequency band: 2.402 GHz – 2.480 GHz
‒ Channel bandwidth: 40 channels each 2 MHz
‒ Modulation: GFSK (Gaussian Frequency Shift Keying)
‒ Effective Radiated Power (EIRP): -4 dBm
14.5. User Information acc. to FCC15.21
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s
authority to operate the equipment.