THERA-Trainer BEMO - Joint Forces

EN User manual THERA-Trainer bemo
37
Article no. A007-661_Rev 2.0 - Last edited: 2020-06-02
17.6. Joint forces
The following diagram shows the joint forces acting on a patient. Upper body training is limited to a
maximum drive power of 8 Nm.
The THERA-Trainer automatically detects whether a leg exerciser or upper body exerciser accessory
is plugged in. The drive power is automatically limited during an upper body training session.
The maximum drive power can be set separately for leg/upper body workout in the submenu
(see chapter 18.2).
The joint forces acting on the patient
 must be observed for every training session.
 must be clarified with the doctor.
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
Joint force in kg
Max. drive power in Nm
Radius of movement
position 1 (55 mm)
Radius of movement
position 2 (85 mm)