Thermal Dynamics CUTMASTER Service Manual

CUTMASTER 40mm
GENERAL INFORMATION 1-6 Manual 0-5085
1.07 Declaration of Conformity
Manufacturer: Thermal Dynamics Corporation
Address: 82 Benning Street
  WestLebanon,NewHampshire03784
  USA
Theequipmentdescribedinthismanualconformstoallapplicableaspectsandregulationsofthe‘LowVoltageDirective’(2006/95EC)andto
the National legislation for the enforcement of this Directive.
Theequipmentdescribedinthismanualconformstoallapplicableaspectsandregulationsofthe"EMCDirective"(EuropeanCouncilDirective89/336/
EEC)andtotheNationallegislationfortheenforcementofthisDirective.
Serialnumbersareuniquewitheachindividualpieceofequipmentanddetailsdescription,partsusedtomanufactureaunitanddateofmanufacture.
National Standard and Technical Specifications
Theproductisdesignedandmanufacturedtoanumberofstandardsandtechnicalrequirements.Amongthemare:
*CSA(CanadianStandardsAssociation)standardC22.2number60forArcweldingequipment.
*UL(UnderwritersLaboratory)rating94VOammabilitytestingforallprinted-circuitboardsused.
*CENELECEN50199EMCProductStandardforArcWeldingEquipment.
*ISO/IEC60974-1(BS638-PT10)(EN60974-1)(EN50192)(EN50078)applicabletoplasmacuttingequipmentandassociatedaccessories.
*Forenvironmentswithincreasedhazardofelectricalshock,PowerSuppliesbearingthe'S'markconformtoEN50192whenusedinconjunctionwith
handtorcheswithexposedcuttingtips,ifequippedwithproperlyinstalledstandoffguides.
*Extensiveproductdesignvericationisconductedatthemanufacturingfacilityaspartoftheroutinedesignandmanufacturingprocess.Thisisto
ensuretheproductissafe,whenusedaccordingtoinstructionsinthismanualandrelatedindustrystandards,andperformsasspecied.Rigorous
testingisincorporatedintothemanufacturingprocesstoensurethemanufacturedproductmeetsorexceedsalldesignspecications.
Thermal Dynamics has been manufacturing products for more than 30 years, and will continue to achieve excellence in our area of manufacture.
Manufacturers responsible representative: Steve Ward
Operations Director
Thermadyne Europe
Europa Building
Chorley N Industrial Park
Chorley, Lancashire,
England PR6 7BX

Thermal Dynamics CUTMASTER Specifications

General

Brand	Thermal Dynamics
Model	CUTMASTER
Category	Welding System
Language	English