Receiver Descrambler - User Manual (release 7.3.1)
Source Port
1. Use the and buttons to move the cursor to
“Source Port:” then press the button.
2. Use the and buttons to select the column to
edit and use the and buttons to change the
destination port (1025 – 65536), then press the
button to save the selection.
Packets Per Frame
1. Use the and buttons to move the cursor to
“Packets/Ip:” then press the button.
2. Use the and buttons to select the column to
edit and use the and buttons to change the
number of packets per frame (1 –7), then press the
button to save the selection.
Differentiated Services
1. Use the and buttons to move the cursor to
“DiffServ:” then press the button.
2. Use the and buttons to select the column to
edit and use the and buttons to change
between (“Default”, “AF11”, “AF12”, “AF13”, “AF21”,
“AF22”, “AF23”, “AF31”, “AF32”, “AF33”, “AF41”,
“AF42”, “AF43”, “EF”), then press the button to
save the selection.
Transmit 2
1. Use the and buttons to move the cursor to
“Transmit 2”, then press the button.
2. Press the button one more time to get to the Edit
screen.
3. Use the and buttons to move the cursor to
“Transmit:” then press the button.
4. Use the and buttons to change the selection to,
“Enabled”, then press the button to save the
selection.
MPEG/IP 1-4
►Transmit:Enabled
Phys Conn:Port 1
IP:239.192.0.1
MPEG/IP 1-4
Transmit 1
►Transmit 2
MPEG/IP 1-4
Source Port:01030
Packets/Ip:7
►DiffServ:Default
MPEG/IP 1-4
Source Port:01030
►Packets/Ip:7
DiffServ:Default
MPEG/IP 1-4 ←→
IP:239.192.0.1
Dest Port:01030
►Source Port:01030
To Next Page
Loading...
