THOMSON RD1000 - Uploading a Saved Profile

THOMSON RD1000 / RD1002
Page 89
Receiver Descrambler - User Manual (release 7.3.1)
Edition 2 – October 2010
1. Choose the desired profile from
the drop down menu.
2. Click the button.
3. A new dialog box will appear and ask what to do with the file.
Click the button and then point to a location on the
local computer.
4. Click the button again.
5.5.7 Uploading a Saved Profile
When a saved profile on a local computer is needed, it is necessary to upload that profile back to the unit.
To upload a profile, from a local computer, back to the unit, use the following steps:
1. Click the
button.
2. A new window will appear with a space to provide
the path of the profile to upload. Click the
button and navigate to the location of the profile on
the local computer. Select the file and then click
.
3. The file path box should now be filled in with the
location of the profile. Click the button.