Receiver Descrambler - User Manual (release 7.3.1)
4.15 System Information
Description: The unit information for unit can be shown using the System menu. The system information
contains the unit version, saving and loading of unit profiles (the configuration of the unit and its
options), viewing the options that are installed in the unit, the unit temperature and the unit time.
The System information is accessed using the following steps:
1. Press the
button.
2. Use the
and
button to move the cursor to “System”
then press the
button.
Versions
This displays the unit’s software version and the software versions of options that have versions
enumerated separately from the unit’s version.
1. Use the
and
button to move the cursor to “Versions”
then press the
button.
2. The versions of the unit and its options are listed.
Profiles
This allows the user to save the configuration of the unit and its options. It also allows the user to load a
previously saved profile or to delete a saved profile.
1. Use the
and
button to move the cursor to “Profiles”
then press the
button.
System
Versions
►Profiles
Hardware
Versions
Unit 6.6.1
Decoder 1
MpegIp 1-3 2.0.4.50309
System
►Versions
Profiles
Hardware
Menu
Genlock Reference
SMPTE 333M
►System
To Next Page
Loading...
