Receiver Descrambler - User Manual (release 7.3.1)
3. A dialog box will appear that has the current name of the
profile in it. Type a new name for the profile in the input box.
4. Click the button in the dialog box to confirm the
rename.
5. After the profile has been renamed, click the button
to close the dialog box.
5.5.4 Applying a Saved Profile
Once one or more profiles have been saved in the unit it is possible to apply any of the saved profiles.
When the selected profile is applied, the settings that were saved in that profile will now be applied. To
apply a saved profile, use the following steps:
1. Choose the desired profile from
the drop down menu.
2. Click the button.
3. It may take up to a minute to apply the new profile. When
the profile has been successfully loaded click the
button to close the dialog box.
5.5.5 Viewing a Saved Profile
To view the settings contained in a saved profile choose the desired profile from the drop down list then
click the button. A new window will appear with all of the settings contained in that profile.
5.5.6 Downloading a Saved Profile
The unit is capable of downloading a saved profile to a local computer. This option can be extremely useful
if more than 24 profiles are needed. Since only 24 profiles can be stored on the unit, new profiles can be
created on the unit and then downloaded to the local computer. To download a profile from the unit, use
the following steps:
To Next Page
Loading...
