Receiver Descrambler - User Manual (release 7.3.1)
unit by transferring them from a PC via the web client interface. Profiles can be deleted, by name, to make
room for others. To configure profiles, first click on the tab to display the profiles section.
5.5.1 Saving a Profile
Once the unit is configured as required for a specific use and environment, the settings can be saved to the
unit by a named profile. To save a profile, use the following steps:
2. Enter a name for the profile.
3. Click the button to save the profile.
4. Click the button after the profile has been successfully
saved.
Note: The profile name should be no more than 15 characters long.
To Next Page
Loading...
