Receiver Descrambler - User Manual (release 7.3.1)
5.1 Login
To login to the remote web client for the unit, use the following steps:
1. Open an Internet Explorer browser window or a Firefox
browser window, then type the IP address of the unit into
the address box and press ENTER.
Note: The IP address of the unit can be found from the front panel “Network Setup” settings, see Section 4.11.
2. Select either the “admin (read-write)” or “user (read-only)”
Username, and enter the associated password. Press the
button to log into the unit.
Note: By default there is no password.
Note: If the password was changed (see Section 5.6) it can be recorded in the provided space below.
Password:__________________________
5.2 Status Indicators
Once logged into the web client, there are many things to take note of. The first things are the four status
indicators along the top of the screen.
These indicators directly reflect the two status LEDs on the front panel. A green LED means the status of that
object is good and a red LED means that status of that object is in error. If any of the indicators are red, a more
detailed explanation is provided by clicking on the tab and looking under the first section, “Error List.”
Refer to Appendix B for a more detailed explanation of the individual errors.
To Next Page
Loading...
