Receiver Descrambler - User Manual (release 7.3.1)
1. Click the button under the “SNMP Settings” heading. This will
bring up a new edit form in the middle of the screen.
2. Use the drop down menus and input boxes to configure SNMP to
the desired settings.
3. At the top of the edit form there are five drop down menus for
enabling or disabling five separate SNMP traps as well.
4. When all of the settings have been configured, click the
button, at the bottom of the form, to save the settings.
5.4.6 SMPTE333M
To enable SMPTE333M, use the following steps:
1. Click the button next to the SMPTE333M title. This will
bring up a new edit form in the middle of the screen.
2. Use the drop down menu to enable or disable SMPTE333M.
3. Click the button, at the bottom of the form, to save
the settings.
5.5 Profiles
Profiles are the means for saving and applying a group of settings on an unit for a particular use. By applying a
particular profile, the user can recall the settings of the unit for different demodulation and decoding needs.
Up to 24 different profiles can be stored on an unit. New profiles can be added to the unit by configuring the
various settings of the unit, then “saving” this profile and giving it a name. New profiles can also be added to an
To Next Page
Loading...
