Receiver Descrambler - User Manual (release 7.3.1)
5. If “Manual” is selected, click the button to choose the
date.
6. Then enter the time manually in the space provided.
7. Click the button to save the changes.
5.4.4 SNMP MIB Modules
In order to control the unit using SNMP, the MIB modules need to be downloaded. The THOMSON specific
MIB modules are displayed under the “Admin/SNMP MIB Modules” heading. The generic MIB modules can be
viewed and downloaded by clicking on the “View All MIB Modules…” hyperlink. That will bring up a new
window displaying all the generic MIB modules. To download these, right-click on the desired MIB module
under the “SNMP MIB Modules” heading and select “Save Target As…”
5.4.5 SNMP Settings
The next section is the SNMP settings. This section gives an overview of all the SNMP settings as well as
the configuration of SNMP. To edit the SNMP settings use the following steps:
To Next Page
Loading...
