Receiver Descrambler - User Manual (release 7.3.1)
Overview
The RD1000 or RD1002 is extremely versatile piece of equipment and in order to further expand its capabilities
its internal setup can be factory configured in a number of different ways.
The RD1000 is a mono channel receiver – descrambler.
This configuration provides no decoded video output. The placement of input/output cards can be in slots
1-2, 1-3, 1-4, 2-2, 2-3, 2-4. No video output cards may be installed. This configuration is usually used as a
satellite receiver or in combination with an MPEG/IP card to encapsulate the TS from the active input and
transmit it via IP. Only one input may be active at a time.
The RD1002 is a dual channels receiver - descrambler
This configuration provides no decoded video output. This configuration offers 2 independent receivers
descramblers, each having its own inputs and outputs. The placement of input/output cards can be in slots
1-2, 1-3, 1-4 for receiver #1 (RDS1) and 2-2, 2-3, 2-4 for receiver #2 (RDS2). No video output cards may
be installed. Only one input per receiver may be active at a time.
To Next Page
Loading...
