THOMSON RD1000 - Page 66

Page 66
THOMSON RD1000 / RD1002
Edition 2 – October 2010
Receiver Descrambler - User Manual (release 7.3.1)
1. Use the and ™ buttons to move the cursor to “Dhcp:”
then press the button.
2. Use the and buttons to change the selection to, “on”,
then press the button to save the selection.
Note: It may take up to a minute for the unit to obtain an IP address. During this time the unit will display a
“busy” message next to DHCP.
 Network 
►Dhcp:on
IP Address
10.0.0.50