Time Electronics 5051 Plus - Conductance

Time Electronics User Manual
5051 Plus and 7051 Plus Multifunction Calibrators v2.1
xx51+ Multifunction Calibrators Page 34 of 64
7.6.5. Conductance
Conductance is available on the R-G-C-L function menu screen.
7.6.5.1. Setting the Output Value
Press the output button required in the main area of the screen. The new output will be applied to the
output terminals, and the readout at the top of the screen will display the new value.
7.6.5.2. Exiting the Conductance Screen
Press the Menu button to return to the R-G-C-L function selection screen.
Conductance