Time Electronics User Manual
5051 Plus and 7051 Plus Multifunction Calibrators v2.1
xx51+ Multifunction Calibrators Page 7 of 64
2.3. 7051 Control Centre Details
Feature Specifications
Processor 64 bit, dual core (or equivalent)
RAM 16GB
Hard Drive 120GB Solid State (or higher)
Ports Front: 4 x USB / Rear: 2 x USB, 2 x RS-232
Display 12.1” Touch Screen LCD
Operating System Windows 10
Pre loaded Software Programs 7051 Manual Control Applications (Calibrator and Multimeter), EasyCal Software
Keypad Module Option
CCPAD: Control Centre numeric keypad module with jog dial
For input/control of manual calibration applications & EasyCal software on the control centre.
Supplied Hardware/Accessories
USB keyboard and mouse, Inkjet Printer, Cal and ID Label Printer, 4 port USB hub, Numeric key pad, USB
memory stick, bar code reader, label printer
Control Centre Operated Module Options
Pressure: XTEG Gauge/Differential/Compound modules (EasyCal software compatible)
Frequency: CCScope Oscilloscope Modules / CC-FRQC Frequency Counter Module
Modules with EasyCal Communication
8030B Pressure Controllers / MTEG/RMTEG Pressure Calibrators / 5065B and 5075B DMMs
7085A Temperature Distribution Module / 7002/7003/7004 Process Communicators /
8029 Electronic Load / 5030B Electrical Tester Calibrator
External Products with EasyCal Communication TEG Digital Pressure Gauges / Dry Block Calibrators
EasyCal Software Add-ons and Options
9779: Job and Address Label Printer / EC2FL/EC2WL: Additional User Licenses for separate PCs
EAD: EasyAdmin Add-On / CREP: Crystal Reports Software
2.4. 7051 General Specifications
Environmental Specifications/Details
Warm up 30 minutes to full accuracy
Settling Time Less than 5 seconds
Temperature Performance Operating: 5 to 45°C. Full Spec: 22°C +/- 3°C. Storage: -10°C to 50°C
Operating Humidity/Altitude <80% non condensing. Altitude: 0 to 3km. Non operating: 3km to 12km
Line Power 100 to 230V AC 50/60 Hz. 200W maximum
Dimensions W425mm (507mm with CCPAD option), H201mm (primary console fitting only)