Time Electronics User Manual
5051 Plus and 7051 Plus Multifunction Calibrators v2.1
xx51+ Multifunction Calibrators Page 35 of 64
7.6.6. Capacitance
Capacitance is selected on the R-G-C-L function menu screen.
7.6.6.1. Selecting an Output Value
Press the output button required in the main area of the screen.
The accuracy specification applies at 1kHz (100Hz for 100uF) and is series mode.
The user should be aware of the effects of stray capacitance in leads and connections.
The effect of these should be accounted for, or balanced out, to obtain accurate calibrations,
particularly for the 1nF value.
7.6.6.2. Exiting the Capacitance Screen
Press the Menu button to return to the R-G-C-L function selection screen.
Capacitance
To Next Page
Loading...