1-2
dummyheaddummyhead
GENERAL INFORMATION
GENERAL INFORMATION
SERIAL NUMBER LOCATION
The engine serial number is stamped on the alternator bracket and the product identification number is located on the right stern
bracket. Always specify these numbers when inquiring about the engine or when ordering parts in order to obtain the correct parts
for the outboard motor being serviced.
SPECIFICATIONS
TYPE DESCRIPTION
It may be necessary to refer to this chart for reference purposes when reading this manual.
The power trim/tilt type motors use an electric/hydraulic power cylinder to trim or tilt the motor.
DIMENSIONS AND WEIGHTS
FRAME
PRODUCT IDENTIFICATION NUMBER
ENGINE SERIAL NUMBER
Model BF250A
Type LA XA XCA XXA XXCA
Shaft Length type L XL XL XXL XXL
Counter Rotation
Remote control ( ) ( ) ( ) ( ) ( )
Power Trim/Tilt
Tachometer () () () () ()
Trim meter ()()()()()
XL: Extra long, XXL: Extra-extra long
( ): Optional part
Model BF250A
Description code BBJJ
Type LA XA XCA XXA XXCA
Overall length 920 mm (36.2 in)
Overall width 625 mm (24.6 in)
Overall height 1,760 mm
(69.3 in)
1,887 mm (74.3 in) 2,014 mm (79.3 in)
Dry weight (*1) 278 kg
(613 lbs)
284 kg (626 lbs) 288 kg (635 lbs)
Operating weight (including oil) 291 kg
(642 lbs)
297 kg (655 lbs) 301 kg (664 lbs)
*1: With propeller mounted.
Stainless type 6.0 kg (13.2 lbs)
Model BF250A
Type LA XA XCA XXA XXCA
Transom height (*1) 508 mm
(20.0 in)
635 mm (25.0 in) 762 mm (30.0 in)
Tilting angle 68°
Tilting stage Stageless
Trim angle (*1) –4° to 16°
Swivel angle 30° right and left
*1: Transom angle is at 12°.
To Next Page
