TOHATSU BFT250A - Assembly; Vapor Separator Disassembly

5-109
dummyheaddummyhead
FUEL SYSTEM
VAPOR SEPARATOR DISASSEMBLY/
ASSEMBLY
Remove the fuel pump (High pressure side) (page 5-
106).
BRACKET B BOLT (6 x 16 m) (2)
VAPOR SEPARATOR
GROMMET (2)
COLLAR (2)
3.4 N·m (0.35 kgf·m, 2.5 lbf·ft)
FLOAT VALVE
FLOAT
2.1 N·m (0.21 kgf·m, 1.5 lbf·ft)
BRACKET
VACUUM TANK
BOLT (6 x 12 mm)
PLATE
BOLT (6 x 14 mm) (2)
WATER JACKET COVER
SCREW/WASHER (5 x 15 mm) (8)
WATER JACKET COVER
FLOAT SCREW (4 x 8 mm) (2)
3.4 N·m (0.35 kgf·m, 2.5 lbf·ft)
VAPOR
SEPARATOR
COVER
ARM PIN
VAPOR SEPARATOR BODY
O-RINGS
COLLAR (8)
WASHER (5 mm) (8)
BRACKET B
12 N·m (1.2 kgf·m, 9 lbf·ft)
COVER SCREW/WASHER (5 x 15 mm) (6)