TOHATSU BFT250A - Page 16

1-6
dummyheaddummyhead
GENERAL INFORMATION
Propeller shaft
Φ4 mm (Φ0.2 in)
ANSI INV.S. 16/32 x 15T x 30° M18 x 1.5 mm Φ16.86 – 16.93 mm (Φ0.664 – 0.667 in) Φ24.8 – 24.9 mm (Φ0.976 – 0.980 in)
Φ29.9 – 30.2 mm (Φ1.177 – 1.189 in)
30° – 31°
7 mm (0.3 in)
28.5 mm
(1.12 in)
57.0 – 58.0 mm
(2.24 – 2.28 in)
56.5 mm (2.22 in)
151 mm (5.9 in)