Remove the oil pump (page 12-9).
OIL PUMP COVER
DOWEL PIN (5 x 8 mm) (2)
INNER ROTOR
(Mark so the rotor is reinstalled in the
same direction as when it is removed)
OIL SEAL (31 x 46 x 7 mm)
OUTER ROTOR
(Mark so the rotor is reinstalled in the
same direction as when it is removed)
OIL PUMP COVER SCREW
(6 x 16 mm) (8)
39 N·m (4.0 kgf·m, 29 lbf·ft)
RELIEF VALVE SPRING
RELIEF VALVE
OIL SEAL (46 x 60 x 9 mm)
7.0 N·m (0.71 kgf·m, 5.2 lbf·ft)
OIL PUMP BODY
OIL PUMP BODY
SEALING BOLT (22 mm)
49 N·m (5.0 kgf·m, 36 lbf·ft)
49 N·m (5.0 kgf·m, 36 lbf·ft)
Threebond
®
#1216, Hondabond HT,
Hondabond 4, or equivalent
OIL PUMP RELIEF
SEALING BOLT (18 mm)
OIL PUMP BODY
SEALING BOLT (22 mm)
Threebond
®
#1216, Hondabond HT,
Hondabond 4, or equivalent
To Next Page
