TOHATSU EverRun MX 18E2 Service Manual

3-24
Maintenance
2st X18E2 2012
GB
11
22
3
16) Inspection of Propeller
1. Check propeller blades and hub for cracks, damages,
wear and corrosion. Check spline for twist, and replace
propeller if necessary.
17) Replacement of Anode
1. Clean dirt from anode and trim tab.
Check if grease or oil is adhered to the components.
Clean if necessary.
CAUTION
Anode protects outboard motor from
galvanic corrosion. Do not paint or apply
grease or oil to anode. Doing so disables
the anode.
2. Check anode 1, 2 a and trim tab 3 for deterioration.
Replace anode (or trim tab) if volume is reduced to 2/3 of
new part.
MX18EFSch03120622.qxd12.6.221:52PM  ページ24

TOHATSU EverRun MX 18E2 Specifications

General

Brand	TOHATSU
Model	EverRun MX 18E2
Category	Outboard Motor
Language	English