EasyManuals Logo

Topcon DS Series User Manual

Topcon DS Series
202 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #190 background imageLoading...
Page #190 background image
28. SPECIFICATIONS
183
Bluetooth profile SPP, DUN
Power class Class 1
Usable range to 150 m
*21,*22
(While in communication with designated controllers)
Authentication Yes/No (selectable)
*20 : Bluetooth function may not be built in depending on telecommunications regulations of the
country or the area where the instrument is purchased. Contact your local dealer for the
details.
*21 : No obstacles, few vehicles or sources of radio emissions/interference in the near vicinity of
the instrument, no rain
*22 : Usage range could be shorter depending on specifications of Bluetooth device to
communicate.
Wireless LAN communication
Communication distance: About 100 m
(While in communication with designated controllers)
*23
Transmission output: 14.5dBm (11g), 15dBm (11b)
Transmission method: IEEE802.11g: Orthogonal Frequency Division Multiplexing (OFDM)
IEEE802.11b: Direct sequence spread spectrum (DS-SS)
Transmission specifications:IEEE802.11g/IEEE802.11b
Access method: Infrastructure mode, adhoc mode
Security: Adhoc mode: WEP(128/64bit)
Infrastructure mode: WEP(128/64bit), TKIP
Frequency range: 2,412 to 2,472MHz (1 to 11 ch)
*23 : Usage range could change depending on the communication conditions.
Power Supply
Power source Rechargeable Li-ion battery BDC70
Working duration at 20 °C
(Fine distance measurement (single) using Auto Pointing and Bluettooth communication,
repeated every 30 sec)
BDC70: about 4.5 hours
BT-73QA (external battery, optional accessory): about 16 hours
(Fine distance measurement (single) using Auto Pointing and Bluettooth and wireless LAN
communication, repeated every 30 sec)
BDC70: about 4.0 hours
BT-73QA (external battery, optional accessory): about 14 hours
(Fine distance measurement (single) using Auto Tracking and Bluettooth communication,
repeated every 30 sec)
BDC70: about 3.5 hours
BT-73QA (external battery, optional accessory): about 12 hours
(Fine distance measurement (single) using Auto Tracking and Bluettooth and wireless LAN
communication, repeated every 30 sec)
BDC70: about 3.0 hours
BT-73QA (external battery, optional accessory): about 10.5hours
Battery state indicator 4 levels
Auto power-off 5 levels (5/10/15/30 min/Not set) (selectable)
External power source 6.7 to 12V

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Topcon DS Series and is the answer not in the manual?

Topcon DS Series Specifications

General IconGeneral
BrandTopcon
ModelDS Series
CategoryMeasuring Instruments
LanguageEnglish

Related product manuals