182
28. SPECIFICATIONS
Motor
Type DC motor drive
Motion range 360°(Vertical and horizontal)
Rotation speed 70°/sec (at 20°C)
(Rotating time: about 8 sec. (when rotating 180°, tilt compensation
off, at 20°C))
Fine motion Operated by jogs (minimal unit of motion is about 1")
Camera
Pixel 5M pixel, QSXGA
Effective pixels 2560 X1920
Total pixels 2592 X1944
Magnification 1.0/2.0/4.0/8.0
Minimum focus 7.0 m
Angle of field
Long side 15.3°
Short side 11.5°
Diagonal line 19.1°
Internal memory
Capacity 500 MB (includes memory for program files)
External memory
USB flash memory (up to 8 GB)
Data transfer
Data input/output Asynchoronous serial, RS232C compatible
USB USB Ver. 2.0, Host (Type A) and Client (Type miniB)
RC Handle (RC-5HDSi) (Option)
Operable range (Slope distance when using RC-5 under normal atmospheric conditions
*1
)
Standard mode 2
*17
to 100 m
*18
Far mode 2
*17
to 250 m
*19
2
*17
to 300 m
*18
Maximum detecting area (vertical angle)
±30° (on the basis of horizontal direction)
Remote Control System Turning operation time (RC-5)
About 16 sec (until completion of rapid (single) measurement)
*17 : When there is almost no vertical interval between instrument height and the target height, the
instrument height is 1.5 m, target height is 0.10 m at a horizontal distance of 1.8 m
*18 : When the vertical interval between DS and the beam emitter of Remote Controller is no more
than 20 m
*19 :When the vertical interval between DS and the beam emitter of Remote Controller is no more
than 40 m
Bluetooth wireless communication
*20
Transmission method FHSS
Modulation GFSK
Frequency band 2.402 to 2.48GHz
To Next Page
Loading...
Need help?
General
