EasyManuals Logo

Topcon DS Series User Manual

Topcon DS Series
202 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #188 background imageLoading...
Page #188 background image
28. SPECIFICATIONS
181
Prism-5
: 1.3 to 500 m (1,640 ft)
Prism-
2: 1.3 to 1,000 m (3,280 ft)
Auto Tracking speed
*10,*12
15°/sec
Auto Pointing
Measuring method Pulse laser transmitter and image sensor with co-axial optics
Signal source (emitted beam) infrared laser diode (980 nm)
Class 1
(IEC60825-1 Ed. 2.0: 2007/FDA CDRH 21 CFR Part 1040.10 and
1040.11 (Complies with FDA performance standards for laser
products except for deviations pursuant to Laser Notice No.50, dated
June 24, 2007.))
Viewing angle ± 45’
Measuring range H: 360° (full transit)
V: Elevation angle 90° (when handle is attached: 70°),
Depression angle 41°
*11
Auto Pointing measurement range
*12
360° Prism ATP1/ATP1S: 2 to 600 m (1,960 ft)
*3,15
Prism-5:
1.3 to 500 m (1,640 ft)
Prism-
2: 1.3 to 1,000 m (3,280 ft)
Reflective sheet RS10/30/50:5 to 50 m (160 ft)
*13,*14
Reflective sheet
RS90N-K: 10 to 50 m (160 ft)
*13,*14
Time to completed Auto Pointing
*12
(When prism in field-of-view, at 100 m distance)/(using RS90N-K, at
50 m distance)
4 to 8 sec.
*16
Sighting accuracy (standard deviation)
*12
Prism: 1.2 mm or less (equivalent angle) (to 100 m),
(0.3 + 9ppm X D) or less (equivalent angle) (100 m and over)
Reflective sheet RS90N-K: 2 mm or less (equivalent angle)
*13,*14
*10 : Distance measurement may not be performed during Auto Tracking.
*11 : Measuring time may be longer around elevation angle 90°, because the tilt compensation is
not in operation.
*12 : No haze, visibility over 20 km, slightly overcast (less than 30000 lx), no scintillation.
*13 : When using a reflective sheet for Auto Pointing, the size of sheet (10 to 90 mm) must be
selected to correspond to the distance being measured. Use smaller reflective sheets for
shorter distances.
*14 : Figures when the Auto Pointing beam strikes within 15° of the reflective sheet target.
*15 : Figures when the Auto Pointing beam strikes within elevation and depression angle 15° of the
360° prism.
*16 : Measuring time may be longer when search area is widely set and target is positioned far from
the sighting direction.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Topcon DS Series and is the answer not in the manual?

Topcon DS Series Specifications

General IconGeneral
BrandTopcon
ModelDS Series
CategoryMeasuring Instruments
LanguageEnglish

Related product manuals