Topcon DS Series - Page 83

76
13. MANEGING THE CAMERA TAB
Camera setting screen
When observing the sun, attach the solar filter and the set the sunlignt mode in this screen.
"27. OPPTIONAL ACCESSORIES"
Select higher value as the sunlight becomes brighter.
Items set and options (*: Factory setting)
Sunlight Mode : Off*/1/2/3
Sighting and measurement
The instrument and telescope can be rotated to the specified point by tapping a point on the
screen. Flows of rotation by tapping differ depending on the status of the instrument.
Status of the instrument
before tapping
Rotation flows
Reticle is displayed on
the screen (no parallax
exists)
By tapping a point on the screen, instrument rotates to the position
and the reticle is adjusted to the center the point. Until the
distance is measured, a triangle is displayed.
Triangle is displayed on
the screen (a parallax
exists)
By tapping a point on the screen, instrument rotates to the position
to adjust the position becomes the center of the camera view. Until
the distance is measured, a triangle is displayed.
"  Automatic
elimination of parallax"