13. MANEGING THE CAMERA TAB
77
Automatic elimination of parallax
Parallax here is the difference of the positions between the telescope reticle and the top corner
of the triangle displayed on the screen. There exists a parallax because the built-in camera and
the telescope are not on the same axis.
When a distance is not measured or the instrument/telescope is moved after a measurement, a
triangle is displayed on the screen, which indicates a parallax exists. Once a distance is
measured, DS detects the parallax and eliminates it automatically then telescope reticle is
displayed on the screen.
To Next Page
Loading...
Need help?
General
