Getting Acquainted with the GMS-2
P/N 7010-0752
1-7
receiver clock and GPS time. All this information can be stored in the
the optional SD card and internal flash memory, then processed using
a post-processing software package.
Capabilities of the GMS-2 receiver include:
• Multipath reduction
• Wide area augmentation system (WAAS)
• Single-frequency static, kinematic, and differential GPS (DGPS)
survey modes
• Setting different mask angles
• Setting different survey parameters
The integrated 1.3 megapixel camera is used for taking pictures of
surveyed objects or survey sites.
Getting Acquainted with the
GMS-2
The GMS-2 is an integrated field controller and 50-channel GPS
receiver with an internal electronic compass and digital camera. USB
and serial ports, along with Bluetooth® wireless technology provide
communication paths with other devices. An external GPS antenna
connector allows an optional PG-A5 antenna to be connected for
centimeter-level surveys.
The standard GMS-2 package contains the following items:
• GMS-2 integrated receiver/controller activated for GPS L1
signals
• Handstrap and soft case
• USB cable and power converter/adapter cable
• BTManager and GMS Tools factory-installed software
For more details on accessories and options available for the GMS-2,
contact your local Topcon dealer.
GMS-2_OM_Book.book Page 7 Friday, December 28, 2007 1:47 PM
To Next Page
Loading...
Need help?
General
