Topcon GMS-2 User Manual

P/N 7010-0752
Chapter 2
2-1
Preparing the GMS-2
for Use
Before using the GMS-2, make sure the battery is fully charged. If
using other software to survey with (such as, TopSURV), install it in
the office. An optional SD card should also be inserted before
beginning to survey.
Attaching the Hand Strap
The hand strap provides a comfortable, secure support for using the
GMS-2 on the job. The velcro extender at the bottom of the strap
allows for comfortable re-adjustment of the strap for larger or smaller
hands.
To attach the hand strap, thread the bottom end of the strap through
the hook on the bottom of the GMS-2 and press the velcro together.
Gently stretch the strap and hook the top end onto the hand strap hook
on the back of the GMS-2.
Figure 2-1. Attaching the Hand Strap
When replacing the battery, unhook the top end of the strap to access
the battery door latch.
1
2
GMS-2_OM_Book.book Page 1 Friday, December 28, 2007 1:47 PM

Topcon GMS-2 Specifications

General

Brand	Topcon
Model	GMS-2
Category	GPS
Language	English