Troubleshooting
GMS-2 Operator’s Manual
6-4
Resetting the Hardware
Only perform a hardware reset when the GMS-2 has become
completely unresponsive. A hardware reset will revert all settings to
defaults and erase all RAM data.
To perform a hardware reset, simultaneously hold the ENT and ESC
buttons while pushing the software reset button for two or more
seconds (Figure 6-2). The unit will power off.
Figure 6-2. Resetting the Hardware
Completely draining the battery performs the same function as a
hardware reset.
A hardware reset will erase all RAM data and
applications.
Regular backups will ensure RAM data and
applications can be restored.
ENT
ESC
Push Software
Reset Button
While Pressing
ENT and ESC
Buttons
GMS-2_OM_Book.book Page 4 Friday, December 28, 2007 1:47 PM
To Next Page
Loading...
Need help?
General
