Troubleshooting
GMS-2 Operator’s Manual
6-2
Troubleshooting Quick List
To reset the software, see “Resetting the Software” on page 6-3.
To reset the hardware, see “Resetting the Hardware” on page 6-4.
For power problems:
If “The GMS-2 does not power up” see page 6-5.
For general GMS-2 problems:
If “The GMS-2 is not receiving data (corrections) from an
external receiver” see page 6-5.
If “Installed software and other data has been erased” see
page 6-6.
For Bluetooth problems:
If “The GMS-2 is no longer connected via Bluetooth” see page 6-
6.
If “Cannot connect to another Bluetooth-enabled device” see
page 6-6.
GMS-2_OM_Book.book Page 2 Friday, December 28, 2007 1:47 PM
To Next Page
Loading...
