60
SETTING AND CHANGING THE SOFTWARE
(3) Test information
When you execute the test related to the chart, which has been registered in the chart page, the
system status is displayed.
• Test name
Displays the test name.
• Auxiliary lens
Displays the type of the auxiliary lens to be automatically set when starting the test.
• Dial information
Displays the dial information to be displayed when starting the test.
• Mask
Displays the status of the mask to be automatically set when starting the test.
• Data set
Displays the data type of the test to be executed.
• Tes t eye
Displays the eye to be tested.
• Dial
Displays the data to be changed when turning the dial.
• Fog
Displays the fog quantity to be automatically set when starting the test.
• Cover Type
Displays the lens which should be used to occlude (cover) the untested eye during the test.
To Next Page
Loading...
