54
OPTIONAL OPERATIONS
INPUT USING USB
This instrument can input ID numbers from a bar code reader, etc. via the USB.
1 Check the connection of USB IN.
For connection, refer to "CONNECTING EXTERNAL I/O TERMINALS" on page 29.
2 Input ID numbers from the external device.
The inputted ID numbers are displayed on the screen.
OUTPUT USING LAN
This instrument can output data to a PC, etc. via the LAN interface.
1 Connect the network cable to LAN OUT.
For connection, refer to "CONNECTING EXTERNAL I/O TERMINALS" on page 29.
2 Set up of LAN connection settings.
For details, refer to "NETWORK SETTINGS" on page 61.
3 Perform photograph. Tap the button of the control panel.
Output is completed.
NOTE
For explanation of messages during communication refer to the
"MESSAGE LIST" on page 64.
To Next Page
Loading...
