65
TROUBLESHOOTING
"Turn off the unit?" Displayed to confirm whether to move the chinrest and measuring head to their
last positions.
"Please wait until packing mode
is finished..."
Indicates that the packing operation is in process. Wait until it is completed.
"Packing mode is finished.
Please turn off the device."
Indicates that the packing operation is completed. Switch off the machine.
"First Octet is 1 - 223 Range" Displayed when the first octet of IP address, default gateway, primary DNS
server or secondary DNS server is set to a value out of the specified input
range.
"Value is irregular. Input valid
value"
Displayed when the octet is set to a value out of the specified input range.
Enter a value within the input range.
"The IP address is 0 - 255
Range"
Displayed when the subnet mask is set to a value off the input rule. Enter a
value within the input rule.
"At least 3 characters are
required for operator ID prefix."
Displayed when the input examiner ID prefix is less than 3 characters. Enter a
prefix with 3 characters.
"Incorrect password" Displayed when the password inputted to select a special mode is incorrect.
"Please don't place the face on
the chinrest, to prepare for next
measurement."
Displayed to confirm whether to place the face on the chinrest or not, because
the measuring head shall move to the "stand by mode" position of the initial
setting.
To Next Page
Loading...
