Toro 08743 - Page 188

InstallingtheHydraulicSwitchKitManifold
RefertoFigure74forthisprocedure.
1.Ifthehydraulicttingswereremovedfromthemanifold,lubricatenewO-rings
withcleanhydraulicuid,positiontheO-ringstothettings,andinstallthe
ttingsinthemarkedorientation;refertoInstallingtheHydraulicFittings
(SAEStraightThreadO-RingFittings)(page5–9).
g352717
Figure75
1.Cap–malecoupler(2each)6.Manifoldassembly
2.Cap–femalecoupler7.Straighttting(2each)
3.Coupler–female8.Elbowtting
4.Adapter(3each)9.Coupler–male(2each)
5.Elbowtting(3each)
2.Ensurethatallmanifoldcomponentsareproperlyinstalledpriortoinstalling
themanifoldintothemachine;refertoServicingtheOptionalHydraulic
SwitchKitManifold(page5–119).
3.Securethemanifoldassemblyandthecouplerpaneltothehitchtubewith
thepreviouslyremovedfasteners.
4.PositionthepreviouslyremovedfastenerthroughtheR-clamp,manifold
bracket,andframetube.
Note:Installthehydraulictankclampandlocknutwheninstallingthe
hydraulictanklaterinthisprocedure.
5.Removethecapsandplugsthenconnectthehydraulictubesandhosesto
themanifoldttings;refertoInstallingHydraulicHosesandTubes(O-Ring
FaceSealFitting)(page5–7).
6.Connectthewireharnessconnectorstothesolenoidvalves.
7.Installthehydraulictank;refertoInstallingtheHydraulicT ank(page5–67).
HydraulicSystem:ServiceandRepairs
Page5–118
SandPro
®
3040and5040
20251SLRevA