Toro Multi Pro WM - Page 88

InstallingtheJackstands
Liftingequipmentcapacity:408kg(900lb)
1.Alignthefrontjackstandwiththejackstand
receiveratthefrontofthetank(Figure130).
g028422
Figure130
1.Clevispin(1/2x3inch)4.Hairpin(5/32x2-5/8
inches)
2.Jackstandreceiver5.Frontjackstand
3.Lockknob
2.Insertthejackstandintothereceiveruntilthe
middleholeinthehorizontaljackstandtubeis
alignedwiththeholeinthetopofthereceiver
(Figure130).
3.Inserttheclevispin(1/2x3inches)intothe
holesinthejackstandandreceiverandsecure
theclevispinwithahairpin(5/32x2-5/8inches).
4.Threadalockknobintothereceiverandtighten
theknobbyhand(Figure130).
5.Aligntherearjackstandwiththerearjackstand
receiver(Figure131).
g028423
Figure131
1.Hairpin(5/32x2-5/8
inches)
3.Jackstandreceiver
2.Clevispin(1/2x4-1/2
inches)
4.Rearjackstand
6.Aligntheholeinthetopofthejackstandwiththe
holeintheframeofthetankskid(Figure131)
7.Securethejackstandtothereceiverandthe
framewith2clevispins(1/2x4-1/2inches)and
2hairpins(5/32x2-5/8inches)asshownin
Figure131.
8.Repeatsteps1through7forthefrontandrear
jackstandsattheothersideofthetankskid.
88