5-17Z Master Z597 Diesel Service Manual
5
25. Tighten the hose clamps and the two bolts and nuts
on the air cleaner mount (Fig. 278).
Fig 278 DSC-2441
26. Install the air intake hose between the engine and air
lter. Tighten the hose clamps (Fig. 279).
Fig 279 DSC-2440
Fig 281 DSC-2435
28. Install the radiator and frame assembly to the right
and left upper frame (Fig. 281).
Fig 280 DSC-2439
27. Insert a 3/8” ratchet wrench into the spring loaded
idler arm. Pull down to install the pump drive belt
from the engine to the hydro pump pulleys (Fig.
280).
ENGINE
To Next Page
Loading...
